85mm Micro FPV Racing Brushless RC Drone

$94.99 USD

Sale Sold out

Shipping calculated at checkout.

Color ELRS PNP Flysky Frsky TBS

Quantity

SPECIFICATIONS

Brand Name: EACHINE

Control Channels: 2 CHANNELS

Flight Time: 5~10

Transit Time (Days): /

Controller Mode: MODE2

Controller Mode: MODE1

Operator Skill Level: Beginner

Drone Weight: /

Anti-wind Ability: /

Package Includes: Original Box

Remote Control: No

Features: other

Indoor/Outdoor Use: OUTDOOR

Video Capture Resolution: other

Camera Mount Type: other

Takeoff Weight: /

Origin: Mainland China

Choice: yes

Are you tired of the power performance of the 1S whoop you own Do you want more power to ripping and roaring in your backyard Yes, here comes Mobula8, which is Happymodel's first attempt on an 85mm frame. It comes with an X12 series flight controller, EX1103 KV11000 motor, and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.

Features:

Comes with X12 5IN1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX

VTX Power up to 400mW, with high-grade imaging performance

ELRS V2.0 (Default), provides firmware to support ELRS V3.0

Smooth and Powerful EX1103 KV110000 motors

CaddxFPV Ant FPV camera, full-featured nano camera

Compatible with 1S-2S Lipo / LIHV battery, which provides more selection in flight.

Recommend 2S 450mah/550mah/650mah battery (Not include)

Specifications:
Brand Name: Happymodel
Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
Wheelbase: 85mm
Size: 120mm*120mm*50mm
Weight: 43g
Receiver option:
2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0)
SPI Frsky D8/D16 not compatible with EMAX E6 radio
SPI Flysky AFHDS2A
PNP (without onboard receiver)
TBS version(with external TBS CRSF NANO RX)

EX1103 KV11000 brushless motor	Mode: EX1103 KV11000
	Configu-ration:9N12P
	Stator Diamter:11mm
	Stator Length:3mm
	Shaft Diameter:Φ1.5mm
	Motor Dimension(Dia.Len):Φ13.5mm15.5mm
	Weight(g):3.8g
	No.of Cells(Lipo):1-2S
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)	Weight:0.88g
	Material: PC
	Pitch:2.3inch
	Props Dia:52.17mm
	Center Thickness:5mm
	Center Hole Dia:1.5mm
X12 5-IN-1 AIO flight controller	X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
	X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
	X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
	X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
	MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
	Sensor: ICM20689 or ICM42688P(SPI connection)
	Mount hole size: 25.5mm*25.5mm
	Power supply: 1-2S battery input (DC 2.9V-8.7V)
	Built-in 12A(each) Blheli_S 4in1 ESC
	Built-in Betaflight OSD(SPI Control)
	Built-in 5.8G OpenVTX 0mw~400mw
	Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
	Built-in voltage detection
	Built-in current sensor
Onboard 4in1 ESC	Power supply: 1-2S LiPo/LiPo HV
	Current: 12A continuous peak 15A (3 seconds)
	Support BLHeliSuite programmable
	Firmware target: Z_H_30
	Default protocol: DSHOT300
	Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 50Hz/150Hz/250Hz/500Hz
	ExpressLRS Firmware version: V2.0
	RF Frequency: 2.4GHz
	Antenna : SMD antenna
	Telemetry output Power: <12dBm
	Receiver protocol: SPI ExpressLRS
	Compatible with ExpressLRS V2.0 TX Module
	Couldn’t flash separately ExpressLRS firmware
	Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Versio	SPI BUS receiver Frsky D8/D16 compatible
	Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch
	No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Onboard SPI Flysky receiver Version	SPI BUS receiver
	Protocol: AFHDS-2A
	Channels: 14ch(AFHDS-2A)
	No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
	Failsafe support
PNP Version (without onboard receiver)	Full UART1 for external Receiver
	Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
	IR1 pad(invert RX1) used for SBUS input
External TBS CRSF Nano receiver version	Original TBS Receiver, CRSF Protocol , Official TBS transmitter compatible
Onboard 5.8g OPENVTX	Firmware version: OPENVTX
	Smartaudio v2.1
	PIT Mode support
	RCE Mode support
	Channels:48ch
	Transmitting Power: 0/RCE/25mw/100mw/400mw
	Power supply: DC 5V
	Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera	Image Sensor: 1/3″ CMOS Sensor
	Horizontal Resolution: 1200 TVL
	TV System: NTSC or PAL
	IMAGE: 16:9 or 4:3
	Synchronization: Internal
	Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
	S/N Ratio : >52dB (AGC OFF)
	Video Output: CVBS
	Lens: 1.8mm
	Min. Illumination: 0.001Lux@F1.2
	Auto Gain Control: YES
	WDR: Global WDR
	DNR: 3D DNR
	Dimensions: 1414mm(with bracket to 1919mm)
	Wide Power Input: DC 3.7-18V
	Weight: 2g (N.W.)